Blizzard Buster Helmet Safety Lights
Choose from 12 different selectable colors
- The Blizzard Buster makes you more visible to other riders with up to 200 lumens of light.
- Choose between 12 different colors with a built in waterproof switch.
- Better visibility, even in the worst snow dust conditions day or night.
- The Blizzard Buster provides an increased level of safety for all snowmobilers, especially families and groups.
- With its unique patented design, the built in splitter connects the DC power from your snowmobile to both your heated shield and the Blizzard Buster.
- Highly efficient LEDs draw less than 0.5 watts. Does not interfere with the functionality of the heated shield.
Pricing: Color Selectable  – $76.99 (US) / $100.00 (CA)
Blizzard Buster Mission
- Only fits the Mission helmet. Installation video link included with the Blizzard Buster.
- Comes in either gloss black or matte black to match the opposite side vent
- Better visibility, even in the worst snow dust conditions day or night.
- The Blizzard Buster provides an increased level of safety for all snowmobilers, especially families and groups.
- With its factory-look, the splitter is built-in to the side vent and replaces the DOT badge on the back. It connects the DC power from your snowmobile to both your heated shield and the Blizzard Buster.
- Highly efficient solid red LEDs draw less than 0.5 watts. Does not interfere with the functionality of the heated shield.
Must be connected to a snowmobile with direct current (DC) power. Please check with us if you are unsure. Will NOT fit on a Titan helmet due to the design of the splitter being built-in to the side vents. Titan helmets do not have side vents.
Available in Gloss Black or Matte Black
Pricing: Blizzard – Mission  – $109.99 (US) / $150.00 (CA)
 Pricing:  |  Color Selectable  – $76.99 (US) / $100.00 (CA)
Pricing:  |  Blizzard – Mission  – $109.99 (US) / $150.00 (CA)
Blizzard Buster Oxygen/Advex
Choose from 12 selectable color (five shown below)
- Only fits the Oxygen and some* Advex helmets.
- The Blizzard Buster makes you more visible to other riders, with up to 200 lumens of light, even in heavy snow dust conditions day or night.
- Increased level of safety for all snowmobilers, families and groups.
- Simple installation. A built-in magnet fits over the current magnet, allowing your power cord to pop on and off with ease.
- Connects DC power from your snowmobile** to both your heated shield and the Blizzard Buster.
- Highly efficient LEDs draw less than 0.5 watts. Does not interfere with the functionality of the heated shield.
- Choose from 12 different colors with the built-in button.
- Installation video link included with the Blizzard Buster.
*The Advex helmets will fit differently to the Oxygen. The Blizzard Buster will not cover the existing light on the newer models, contact us for help and inf.Â
**Must be connected to a snowmobile with direct current (DC) power. Please check with us if you are unsure.
Pricing: Blizzard – Oxygen/Advex  – $109.99 (US) / $150.00 (CA)
- Designed with high strength 22 AWG wire with a silicone rubber jacket for more flexibility in the cold.
- The Power Accessory Cord is built with our own proprietary solid metal male RCA tips.
- Comes with our own unique twist-lock connector providing a more secure connection while riding.
- Our right angle male RCA works perfectly with the Color Selectable Helmet Safety Light.
- The most durable RCA power cord in the industry.
Pricing: Power Cord – $32.99 (US) / $40.00 (CA)
Pricing:  |  Blizzard – Oxygen/Advex  – $109.99 (US) / $150.00 (CA)
Pricing:  |  Power Cord  – $32.99 (US) / $40.00 (CA)
Magnetic Power Accessory Cord
The only heated magnetic cord on the market.
Keeps the magnetic connection from freezing, even in the coldest conditions.
Proprietary solid metal RCA tips. No more walking away and ripping your cord.
22 gauge premium wire with a cold-resistant silicone rubber jacket.
Right angle RCA fits perfectly into the Blizzard Buster.
Leave the short cord attached to your helmet and the long cord on the sled.
Pricing:  |  Magnetic Power Cord  – $64.99 (US) / $90.00 (CA)
USB-C Power Interface
LJE ProUSB module is designed for cold wet weather. No more batteries or communicators dying in the cold weather.
USB module features a contoured back with 3M adhesive can be mounted to any helmet.
Reroute your accessory power cord’s male RCA jack to our USB module and keep your Comm unit, action camera, heated shield, and Blizzard Buster powered as you ride.
Features a type C USB female port with a built in O-ring to keep moisture out.
Short flexible male to male type C power cord with O-rings on each connector keeps moisture out of your Comm unit’s USB port.
Can be used to power action cameras while riding as well.
If you have an older comm unit with a micro-usb charger, you can order a short USB-C to micro usb cord to replace the one in our kit.
WARNING: DO NOT USE WITH AN OLDER SNOWMOBILE THAT DOES NOT PRODUCE DC VOLTAGE. VERIFY THAT YOUR SNOWMOBILE IS SENDING DIRECT CURRENT (DC) THROUGH YOUR HEATED SHIELD CORD TO THE USB-C POWER INTERFACE BEFORE PLUGGING IN OR PERMANENT DAMAGE MAY OCCUR.
Pricing:  |  USB-C Power Interface  – $84.99 (US) / $120.00 (CA)
Pricing:  |  Magnetic Power Cord  – $64.99 (US) / $90.00 (CA)
Pricing:  |  USB-C Power Interface  – $84.99 (US) / $120.00 (CA)
No need to be attached to your sled
12 Volt standard capacity Li-ion battery pack for use with Blizzard Buster helmet safety light.
Designed for all day use with Blizzard Buster only. Not suitable for use with heated shield. Choose 9,000 mAh battery pack for use with heated shield.
Includes a power switch and battery level indicator with a type-C charging port. Short female RCA lead connects to heated shield cord.
Store inside jacket pocket to keep the battery warm and out of the way. Slim and compact to fit in most snowmobile jacket pockets.
Water proof up to Ip6 standards. Durable rubber coating for protection.
LJE Products offers 6 month limited warranty from purchase date. Covers factory defects only. Improper use and negligence will void warranty and may cause serious harm. Defective battery must be returned to LJE Products for inspection.
Do not store in a cold environment. Use only charger designed for this battery type. Never leave charging batteries unattended.
Pricing:  |  Battery Pack – 5,000 mAh  –  $109.99 (US) / $165.00 (CA)
Blizzard Buster Battery Pack – 9,000 mAh
- No need to be attached to your sled
- 12 Volt standard capacity Li-ion battery pack for use with Blizzard Buster helmet safety light.Â
- Large battery runs your heated shield and the Blizzard Buster for up to 6 hours.
- Includes a power switch and battery level indicator with a type-C charging port. Short female RCA lead connects to heated shield cord.
- Store inside jacket pocket to keep the battery warm and out of the way. Slim and compact to fit in most snowmobile jacket pockets.Â
- Water proof up to Ip6 standards. Durable rubber coating for protection.Â
- LJE Products offers 6 month limited warranty from purchase date. Covers factory defects only. Improper use and negligence will void warranty and may cause serious harm. Defective battery must be returned to LJE Products for inspection.
- Do not store in a cold environment. Use only charger designed for this battery type. Never leave charging batteries unattended.
Pricing: | Battery Pack – 9,000 mAh – $139.99 (US) / $200.00 (CA)
Pricing:  |  Battery Pack – 5,000 mAh  –  $109.99 (US) / $165.00 (CA)
Pricing:  |  Battery Pack – 9,000 mAh  – $139.99 (US) / $200.00 (CA)
