BITEHARDER Stud Sharpening Tools

Studs wear down over time, reducing their effectiveness, making turning or stopping a challenge, even dangerous. A single trip through rough terrain or down a side road can quickly wear out the carbide tips of your studs. Before BITEHARDER, and the ability to re-sharpen, replacing your studs was the only option, which can be very costly.

Carbide is one of the hardest metals known to man, and is extremely difficult to work with. BITEHARDER sharpening tools use a material that’s even harder: diamonds. Once sharpened, your studs will perform better than original factory studs, and last longer. Most studs can be sharpened 3 to 5 times, saving you money and time.

Carbide Studs Sharpening Tool (STD series)

Our STD Series Tool is designed as a maintenance tool to easily sharpen broken or worn studs without the need to remove them from your track. The Tool is used with any portable drill for convenience and fast, effective sharpening. Our STD Stud Tool is designed to touch up individual studs.

  • Perfect for individual snowmobile owners
  • Requires only a portable drill for anywhere sharpening
  • Studs are re-sharpened at 60 degrees for improved tip profile
  • Maintain the carbide tip of your studs for their entire useful life
  • Sharp studs provide improved control, handling and performance
  • Bite into any surface… hard pack, ice, even asphalt
  • Enjoy a much safer ride with less darting in all conditions

Never ride on dull studs again!

order std sharpener

Pricing: Std Series  – $59.95 (US) / $84.95 (CA)

Carbide Studs Sharpener 60 Degree (PRO series)

PRO Series Tools operate similarly to STD Series Tools but operate at higher speeds (10,000 RPM minimum), using battery or corded electric die grinders. PRO Series use superior quality diamond cutting media to easily sharpen all the studs in your track without needing to remove them.

  • Perfect for dealers to provide a sharpening service for customers
  • Requires a 10,000 RPM battery or corded electric die grinder
  • Studs are re-sharpened at 60 degrees for improved tip profile
  • 60 degree tip is designed for improved groomed trail performance
  • Maintain the carbide tip of your studs for their entire useful life
  • Sharp studs provide improved control, handling and performance
  • Enjoy maximum performance and safety from your machine

Experience maximum performance and safety from your snowmobile

order 60 Degree sharpener

Pricing: Std Series  – $149.95 (US) / $199.95 (CA)

order std sharpener

Pricing: STD Series  – $59.95 (US) / $84.95 (CA)

order 60 degree sharpener

Pricing:  60 degree PRO Series  – $149.95 (US) / $199.95 (CA) 

Carbide Studs Sharpener 45 Degree (PRO series)

PRO Series Tools operate similarly to STD Series Tools but operate at higher speeds (10,000 RPM minimum), using battery or corded electric die grinders. PRO Series use superior quality diamond cutting media to easily sharpen all the studs in your track without needing to remove them.

  • Perfect for dealers to provide a sharpening service for customers
  • Requires a 10,000 RPM battery or corded electric die grinder
  • Studs are re-sharpened at 45 degrees for improved tip profile
  • 45 degree tip is designed for improved hard pack and ice performance
  • Maintain the carbide tip of your studs for their entire useful life
  • Sharp studs provide improved control, handling and performance
  • Enjoy maximum performance and safety from your machine

Experience the maximum performance and safety for your snowmobile

order 45 Degree sharpener

Pricing: Std Series  – $149.95 (US) / $199.95 (CA)

Carbide Studs Sharpener 30 Degree (PRO series)

PRO Series Tools operate similarly to STD Series Tools but operate at higher speeds (10,000 RPM minimum), using battery or corded electric die grinders. PRO Series use superior quality diamond cutting media to easily sharpen all the studs in your track without needing to remove them.

  • Perfect for dealers to provide a sharpening service for customers
  • Requires a 10,000 RPM battery or corded electric die grinder
  • Studs are re-sharpened at 30 degrees for improved tip profile
  • 30 degree tip is designed for greater off the line penetration for racers
  • Maintain the carbide tip of your studs for their entire useful life
  • Sharp studs provide improved control, handling and performance
  • Enjoy maximum performance and safety from your machine

Experience the maximum performance and safety for your snowmobile

order 30 Degree sharpener

Pricing: Std Series  – $149.95 (US) / $199.95 (CA)

order 45 degree sharpener

Pricing:  45 degree PRO Series  – $149.95 (US) / $199.95 (CA)

order 30 degree sharpener

Pricing:  30 degree PRO Series  – $149.95 (US) / $199.95 (CA)

BergstromSkegs

The world’s most durable wear rod since 1976

Scroll to Top

Help me get in control!

Need help with the accessories you need? Call Sandy (U.S.) or Clark or Clayton in Canada.

U.S. Orders

Canadian Orders

Call Sandy at 1-833-WEARBAR (833-932-7227) 

Or fill out the form below

Call Clark: 905-809-1390 or Clayton: 905-404-4601

Or fill out the form below

U.S. Orders

Call Sandy at 833-WEARBAR
(833-932-7227) 

Or fill out the form below

Canadian Orders

Call Clark: 905-809-1390 or Clayton: 905-404-4601

Or fill out the form below

I’d like to order the following accessories. 

We will contact you to verify your order and get your payment information.

Accessories Order

Select Country to Send Order

Select country

My name, address and snowmobile information

Contact me by
Engine
Ski Model

I’d like to order the following products

Prices shown do not include tax. Tax will be added to invoice.

Trail Grabbers
Ski Savers
Rubber Dampers / Stops
Shim Kits

Shim kits include shipping

Contours
STD Carbide Runner Sharpener
PRO Carbide Runner Sharpener
STD Carbide Stud Sharpener
60 Degree PRO Carbide Stud Sharpener
45 Degree PRO Carbide Stud Sharpener
30 Degree PRO Carbide Stud Sharpener

HOLIDAY HOURs

Closed: Dec 23 – Dec 27

Open: Dec 30 & Dec 31 until noon (CST)

Online orders can still be placed but will only be processed during business hours.

Regular hours resume Jan 2, 2025

Select Store to Shop

SHOP U.S. STORE
SHOP CANADA

Help me get the fun back!

Tell me how I can get my sled under control and put the fun back in snowmobiling. 

Bergstrom Skegs products are now available to order in the U.S. and in Canada. 

In the U.S.

In Canada

Call Sandy at 833-WEARBAR (833-932-7227) 

Or fill out the form below

Call Clark: 905-809-1390  or  Clayton: 905-404-4601

Or fill out the form below

In the U.S.

Call Sandy at 833-WEARBAR
(833-932-7227) 

Or fill out the form below

In Canada

Call Clark: 905-809-1390  or  Clayton: 905-404-4601

Or fill out the form below

Please select where you want to direct your inquiry and fill out the information below.

Contact form

Select Country to Send Inquiry

Select country

I’d like some more information

Complete the form below and tell us what you’re interested in.
Contact me by
I’m interested in

Help me get in control!

Need help figuring out which carbide is best for you? Call Sandy (U.S.) or Clark or Clayton in Canada.

U.S. Orders

Canadian Orders

Call Sandy at 1-833-WEARBAR (833-932-7227) 

Or fill out the form below

Call Clark: 905-809-1390 or Clayton: 905-404-4601

Or fill out the form below

U.S. Orders

Call Sandy at 833-WEARBAR 
(833-932-7227) 

Or fill out the form below

Canadian Orders

Call Clark: 905-809-1390 or Clayton: 905-404-4601

Or fill out the form below

I’d like to order the following. 

We will contact you to verify your order and get your payment information.

Triple Point Order

Select Country to Send Order

Select country

My name, address information

Contact me by

I’d like to order wearbars for the following snowmobile

Need wearbars for multiple snowmobiles? Call Sandy (U.S.) or Clark (Canada) to place your order.

Engine
Ski (specify model/make)

Note: All Pilot X Skis require stops. Order stops separately. 2-stroke or 4-stroke specific.

Shim kits are not available for Pilot X skis.

Choose your wearbar

Prices shown do not include shipping or tax. Tax and shipping will be added to the invoice.

Select wearbar (select size below)
Triple Point Carbides
Good ‘n Ugly Carbides
Hard Surface Wearbars
Include Rubber Dampers/Stops?
Trail Grabbers

Order other accessories separately from any accessory page on this site